Commercial Carpet Removal

Industrial and Commercial Carpet Removal and Epoxy Flooring Preparation in Las Vegas

As commercial and commercial structures age, their floors will eventually require to be replaced. Floor elimination equipment varies from $6,000 approximately $40,000, so it is advised working with an expert to complete the task instead of trying it yourself!

What is Considered an Industrial and Commercial Floor?

Industrial centers consist of warehouses, manufacturing plants, and food processing plants, as well as:

  • Shopping centers
  • Retail Space
  • Dining establishments
  • Automobile Car dealerships
  • Hospitals
  • Fitness/Health Centers
  • Gymnasiums
  • Indoor Shooting Ranges
  • Schools

What Kinds of Flooring Do We Remove?

  • Elastomeric Paint
  • Glued Plank
  • Hardwood Floors
  • Vinyl
  • Stone
  • Sheet Vinyl
  • Industrial Carpet Removal and Glued on Carpet
  • Concrete
  • VCT
  • Pool Decks
  • Epoxy
  • Rubber

Las Vegas Epoxy Flooring Pros uses the current technology that is environmentally safe with our industrial-grade floor ditching makers. They are developed as battery-operated vehicles, so they do not have gas or propane fumes. Attached to the device is a vacuum air filter that traps dust and particles that is kicked up when getting rid of the floor covering.

Our ride-on floor scraper is developed to decrease the amount of time it requires to remove floor covering. It can really conserve approximately 75% of the time it initially took to remove most floorings. While the task is untidy, we guarantee we will remove any of the old particles prior to prepping the floor for its brand-new covering.

Once the floor scraper has scraped up all the floor, the sub-flooring needs to be gotten ready for whatever is going to be installed. All the particles needs to be eliminated and dealt with effectively. It is advised that the floor is pressure washed to get rid of any dust residue.

Elastomeric Sealant

Elastomeric sealant is easy to use and is thought about a waterborne high-performance sealant. The covering has a flexible nature and is best for severe climates. The subfloor should be sanded down to make sure the surface is level and clean. Then, the elastomeric is used with a latex roller or brush.

Glued Plank

Glued plank floor covering has different requirements depending upon the subfloor. The floor needs to be level, and all bumps need to be eliminated. If there is a wooden floor, its moisture material need to not be more than 10% cm. For concrete, the moisture material need to not be more than 2.5% cm, and for anhydrite, the moisture should not be more than. 5% cm. A leveling substance can ravel any regularities. Once the floor is dry and clean, the glued plank can be installed.

Hardwood Floors

Hardwood floors require to be prepared much the same as the glued plank. Floor covering manufacturers will supply the optimum level of moisture that will work with their item. The underlayment is then laid out, as it offers a moisture barrier. Then, we install the hardwood floor.

Vinyl and Vinyl Tiles

Preparation for vinyl floor covering is similar to glued plank. Once the floor has been leveled and any imperfections are repaired, the vinyl can be installed.

Stone Floors

Stone floors require to be entirely level, and vents and holes require to be taped off. If the floor is not level, a leveling substance can be mixed and spread across the floor to guarantee it is level. For concrete, it needs to be clean and level also, and cracks require to be repaired. For wood, mortar is installed prior to the backerboard sheets being installed. Once the sheets are installed on wood or concrete, the joints can be filled with mortar. Another layer of mortar is expanded and combed with a trowel prior to the stone is installed.

Industrial Carpet Removal and Glue Down Carpet Removal

Whether a carpet with padding or a glue-down carpet is installed, it is very important that the floor be effectively prepared. The floor needs to be clear of any particles– specifically staples– if the old floor covering had actually been carpet. The staples can be eliminated with a screwdriver and pliers, or a sturdy staple remover.

Patches and cracks will have to be completed if the subfloor is concrete. We seal the floor, and when it is entirely dry, install tack strips along the walls. We then position the padding uniformly and install the carpet over the padding.

Epoxy Floor covering

Epoxy floor is installed over concrete just. The area should be entirely blast tracked, and the dust is sucked up as the device moves over the floor. The blast track eliminates all of the rubber, texture, laitance, and paint. To ensure the floor is completely abraded, the blast track need to be moved up and down overlapping rows. Edges and corners can be smoothed with a surface area grinder. The floor needs to be vacuumed with a commercial-grade vacuum prior to the epoxy is installed.

Rubber Floor covering

Rubber floor covering is usually found in health centers, lunchrooms, and fitness center weight spaces. It is popular because it includes spring and padding underfoot. Subflooring need to be cleaned thoroughly and leveled. Once the subfloor is prepared, double-sided tape can be contributed to the floor– roll out the rubber floor covering, then pull the top of the tape off.

Let us help you with your Carpet Removal today!

Las Vegas Epoxy Flooring Pros is your leading option for commercial carpet elimination in Las Vegas. Visit our About page to find out more about our company. We can complete all of the abovementioned jobs to your fulfillment, and change your old floor covering with a stunning brand-new surface. Contact us today to ask for a quote for your business.

Likewise, check out epoxy floor for garage Las Vegas to know more about garage floor epoxy finishes.

Click to call (702) 904-9461

Fill out the form below to request your estimate:


Click or drag files to this area to upload. You can upload up to 5 files.

Click-2-Call